community.hashi_vault.vault_list lookup – Perform a list operation against HashiCorp Vault
Note
This lookup plugin is part of the community.hashi_vault collection (version 6.3.0-dev0).
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install community.hashi_vault.
You need further requirements to be able to use this lookup plugin,
see Requirements for details.
To use it in a playbook, specify: community.hashi_vault.vault_list.
New in community.hashi_vault 4.1.0
Synopsis
Performs a generic list operation against a given path in HashiCorp Vault.
Requirements
The below requirements are needed on the local controller node that executes this lookup.
hvac(Python library)For detailed requirements, see the collection requirements page.
Terms
Parameter |
Comments |
|---|---|
Vault path(s) to be listed. |
Keyword parameters
This describes keyword parameters of the lookup. These are the values key1=value1, key2=value2 and so on in the following
examples: lookup('community.hashi_vault.vault_list', key1=value1, key2=value2, ...) and query('community.hashi_vault.vault_list', key1=value1, key2=value2, ...)
Parameter |
Comments |
|---|---|
Authentication method to be used.
Choices:
Configuration:
|
|
The AWS access key to use. Configuration:
|
|
If specified, sets the value to use for the Configuration:
|
|
The AWS profile Configuration:
|
|
The AWS secret key that corresponds to the access key. Configuration:
|
|
The AWS security token if using temporary access and secret keys. Configuration:
|
|
The client ID (also known as application ID) of the Azure AD service principal or managed identity. Should be a UUID. If not specified, will use the system assigned managed identity. Configuration:
|
|
The client secret of the Azure AD service principal. Configuration:
|
|
The resource URL for the application registered in Azure Active Directory. Usually should not be changed from the default. Default: Configuration:
|
|
The Azure Active Directory Tenant ID (also known as the Directory ID) of the service principal. Should be a UUID. Required when using a service principal to authenticate to Vault, e.g. required when both azure_client_id and azure_client_secret are specified. Optional when using managed identity to authenticate to Vault. Configuration:
|
|
Path to certificate to use for authentication. If not specified by any other means, the Configuration:
|
|
For Configuration:
|
|
For Configuration:
|
|
The JSON Web Token (JWT) to use for JWT authentication to Vault. Configuration:
|
|
Vault mount point. If not specified, the default mount point for a given auth method is used. Does not apply to token authentication. Configuration:
|
|
Vault namespace where secrets reside. This option requires HVAC 0.7.0+ and Vault 0.11+. Optionally, this may be achieved by prefixing the authentication mount point and/or secret path with the namespace (e.g If environment variable Configuration:
|
|
Authentication password. Configuration:
|
|
URL(s) to the proxies used to access the Vault service. It can be a string or a dict. If it’s a dict, provide the scheme (eg. If it’s a string, provide a single URL that will be used as the proxy for both A string that can be interpreted as a dictionary will be converted to one (see examples). You can specify a different proxy for HTTP and HTTPS resources. If not specified, environment variables from the Requests library are used. Configuration:
|
|
The AWS region for which to create the connection. Configuration:
|
|
Allows for retrying on errors, based on the Retry class in the urllib3 library. This collection defines recommended defaults for retrying connections to Vault. This option can be specified as a positive number (integer) or dictionary. If this option is not specified or the number is A number sets the total number of retries, and uses collection defaults for the other settings. A dictionary value is used directly to initialize the For detailed information on retries, see the collection User Guide. Configuration:
|
|
Controls whether and how to show messages on retries. This has no effect if a request is not retried. Choices:
Configuration:
|
|
Vault Role ID or name. Used in For For Configuration:
|
|
Secret ID to be used for Vault AppRole authentication. Configuration:
|
|
Sets the connection timeout in seconds. If not set, then the Configuration:
|
|
Vault token. Token may be specified explicitly, through the listed [env] vars, and also through the If no token is supplied, explicitly or through env, then the plugin will check for a token file, as determined by token_path and token_file. The order of token loading (first found wins) is Configuration:
|
|
If no token is specified, will try to read the token from this file in token_path. Default: Configuration:
|
|
If no token is specified, will try to read the token_file from this path. Configuration:
|
|
For token auth, will perform a Disable if your token does not have the Choices:
Configuration:
|
|
URL to the Vault service. If not specified by any other means, the value of the If Configuration:
|
|
Authentication user name. Configuration:
|
|
Controls verification and validation of SSL certificates, mostly you only want to turn off with self signed ones. Will be populated with the inverse of Will default to Choices:
Configuration:
|
Notes
Note
When keyword and positional parameters are used together, positional parameters must be listed before keyword parameters:
lookup('community.hashi_vault.vault_list', term1, term2, key1=value1, key2=value2)andquery('community.hashi_vault.vault_list', term1, term2, key1=value1, key2=value2)
See Also
See also
- community.hashi_vault.vault_list
Perform a list operation against HashiCorp Vault.
Examples
- name: List all secrets at a path
ansible.builtin.debug:
msg: "{{ lookup('community.hashi_vault.vault_list', 'secret/metadata', url='https://vault:8201') }}"
# For kv2, the path needs to follow the pattern 'mount_point/metadata' or 'mount_point/metadata/path' to list all secrets in that path
- name: List access policies
ansible.builtin.debug:
msg: "{{ lookup('community.hashi_vault.vault_list', 'sys/policies/acl', url='https://vault:8201') }}"
- name: Perform multiple list operations with a single Vault login
vars:
paths:
- secret/metadata
- sys/policies/acl
ansible.builtin.debug:
msg: "{{ lookup('community.hashi_vault.vault_list', *paths, auth_method='userpass', username=user, password=pwd) }}"
- name: Perform multiple list operations with a single Vault login in a loop
vars:
paths:
- secret/metadata
- sys/policies/acl
ansible.builtin.debug:
msg: '{{ item }}'
loop: "{{ query('community.hashi_vault.vault_list', *paths, auth_method='userpass', username=user, password=pwd) }}"
- name: Perform list operations with a single Vault login in a loop (via with_)
vars:
ansible_hashi_vault_auth_method: userpass
ansible_hashi_vault_username: '{{ user }}'
ansible_hashi_vault_password: '{{ pwd }}'
ansible.builtin.debug:
msg: '{{ item }}'
with_community.hashi_vault.vault_list:
- secret/metadata
- sys/policies/acl
- name: Create fact consisting of list of dictionaries each with secret name (e.g. username) and value of a key (e.g. 'password') within that secret
ansible.builtin.set_fact:
credentials: >-
{{
credentials
| default([]) + [
{
'username': item,
'password': lookup('community.hashi_vault.vault_kv2_get', item, engine_mount_point='vpn-users').secret.password
}
]
}}
loop: "{{ query('community.hashi_vault.vault_list', 'vpn-users/metadata')[0].data['keys'] }}"
no_log: true
- ansible.builtin.debug:
msg: "{{ credentials }}"
- name: Create the same as above without looping, and only 2 logins
vars:
secret_names: >-
{{
query('community.hashi_vault.vault_list', 'vpn-users/metadata')
| map(attribute='data')
| map(attribute='keys')
| flatten
}}
secret_values: >-
{{
lookup('community.hashi_vault.vault_kv2_get', *secret_names, engine_mount_point='vpn-users')
| map(attribute='secret')
| map(attribute='password')
| flatten
}}
credentials_dict: "{{ dict(secret_names | zip(secret_values)) }}"
ansible.builtin.set_fact:
credentials_dict: "{{ credentials_dict }}"
credentials_list: "{{ credentials_dict | dict2items(key_name='username', value_name='password') }}"
no_log: true
- ansible.builtin.debug:
msg:
- "Dictionary: {{ credentials_dict }}"
- "List: {{ credentials_list }}"
- name: List all userpass users and output the token policies for each user
ansible.builtin.debug:
msg: "{{ lookup('community.hashi_vault.vault_read', 'auth/userpass/users/' + item).data.token_policies }}"
loop: "{{ query('community.hashi_vault.vault_list', 'auth/userpass/users')[0].data['keys'] }}"
Return Value
Key |
Description |
|---|---|
The raw result of the read against the given path. Returned: success |